On This Page
Authorization with a Surcharge
Surcharging allows you to pass on a portion of the credit card processing cost to the
cardholder.
Cybersource
does not calculate the surcharge for you and does
not enforce regional or card-brand surcharging rules.Prerequisites
Before you implement surcharge processing, you must complete these prerequisites:
- Contact yourChase Paymentech Solutionsrelationship manager to enable surcharging on your merchant account.
- Provide written notice to the card networks (Visa, Mastercard, Discover) at least 30 days before assessing surcharges. This is a network requirement, not aCybersourcerequirement.
- Sign any surcharging addendum or contract thatChase Paymentech Solutionsor the networks require.
- Post the required customer-facing disclosures at the point of sale and on receipts, according to network rules.
WARNING
Failure to register or to follow card-brand rules results in non-compliance fees assessed by the networks.
Cybersource
cannot detect or prevent these fees on your behalf.Supported Card Types
Surcharges are supported on
Chase Paymentech Solutions
for these credit card types:- ChaseNet: Credit, signature debit, and prepaid
- China UnionPay
- Diners
- Discover
- JCB
- Mastercard
- Visa
IMPORTANT
If you send a surcharge amount on an authorization for a card
type that is not eligible, the surcharge field is ignored and the transaction might
fail.
Calculate the Surcharge
You are responsible for calculating the surcharge amount for each transaction.
Cybersource
does not calculate surcharges. You decide the percentage (or
flat amount), apply it to the eligible portion of the transaction, and include the
resulting amount in the authorization request.Surcharge Percentage Limits
Percentage limits are imposed by the card networks.
Cybersource
does not
enforce them; exceeding them results in network non-compliance fees assessed against
you.Card Type and Region | Maximum Surcharge |
|---|---|
Visa in the US | 3% of the sale amount |
Mastercard in the US | 4% of the sale amount (parity rules apply) |
Visa and Mastercard in Canada | 2.4% of the sale amount |
Discover, JCB, China UnionPay, ChaseNet in the US | Follow each brand's published cap; treat 3% as a safe ceiling unless you have written guidance otherwise. |
Parity rule:
When a transaction could be surcharged at multiple percentages
depending on brand, you must assess the surcharge at the lowest applicable
percentage. For example, if you accept both Visa and Mastercard in the US, your
effective cap is 3% across the board because of Visa's lower limit and Mastercard
parity requirements.State and Regional Rules
Surcharging is regulated by federal, state, provincial, and local law in addition to network rules. Some US states prohibit credit card surcharging entirely, others require specific disclosure language, and some cap the percentage below the network limit.
Cybersource
does not maintain a list of which states allow or prohibit
surcharging and does not inspect the cardholder billing address or merchant location
to decide whether to send the O7 record. Because the system operates as a
pass-through gateway, it transmits the surcharge amount you send regardless of
jurisdiction.IMPORTANT
Research the rules that apply to every state, province, and
country where you accept payments before you turn on surcharging. Consult your legal
counsel and your
Chase Paymentech Solutions
relationship manager. If you operate across
multiple jurisdictions, you might need to suppress the surcharge field on
transactions originating from prohibited regions—that logic must live in your
application, not in Cybersource
.Quick Implementation Checklist
Use this checklist to confirm that your completed implementation meets requirements before you start processing surcharge transactions.
- Surcharging program is registered withChase Paymentech Solutions, and required notice is given to card networks at least 30 days before assessing surcharges.
- Customer-facing disclosures are posted at point of sale and on receipts.
- Application logic computes the surcharge amount per transaction, respecting network caps and the lowest-percentage parity rule.
- Application logic suppresses the surcharge field on ineligible methods of payment (American Express, debit) and on transactions in jurisdictions that prohibit surcharging.
- The surcharge amount is added to the grand total amount sent on the request.
- The surcharge amount uses the same currency as the grand total, numeric only, up to two decimal places. Maximum length is 15 characters.
- The surcharge amount appears populated in the appropriate field for your API.
- Receipts and customer disclosures show the surcharge as a separate line item.
Endpoint
Production:
POST
https://api.cybersource.com
/pts/v2/paymentsTest:
POST
https://apitest.cybersource.com
/pts/v2/payments